Conductor-like Screening Model For Real Solvents Research Articles

Selection of ionic liquid electrolytes for high-performing lithium-sulfur batteries: An experiment-guided high-throughput machine learning analysis

The polysulfide (PS) shuttle mechanism (PSM) is one of the most significant challenges of lithium-sulfur (Li-S) batteries in achieving high capacity and cyclability. One way to minimize the shuttle effect is to limit the PS solubilities in the battery electrolyte. Ionic liquids (IL) are particularly suited as electrolyte solvents because of their tunable physical and chemical properties. In this work, thousands of ILs are screened to narrow down potentially viable candidates to be used as electrolytes in Li-S batteries. To that end, the COnductor-like Screening Model for Realistic Solvents (COSMO-RS) calculations are performed over more than 36,000 ILs. An extensive database containing PS solubilities and other relevant properties is constructed at 25 °C. First, the effectiveness of the COSMO-RS calculations is experimentally tested with six different ILs having a wide range of solubility and viscosity values; a strong correlation between the PS solubility and battery performance is obtained. After specifying the target limits for promising ILs using the experimental battery performance data, machine learning (ML) tools are used to predict and identify the relationship between IL properties and PS solubilities and structural and molecular descriptors of ILs. The extreme gradient boosting (XGBoost) method successfully predicts the solubility and property values. Association rule mining (ARM) and the feature importance analysis show that anion descriptors are more dominant, whereas cations have less impact on the solubilities and properties of ILs. Finally, the imidazolium and pyridinium ILs with bis_imide and borate anion groups are identified as the most promising ones.

Multiscale modeling of CO2 capture in dicationic ionic liquids: Evaluating the influence of hydroxyl groups using DFT-IR, COSMO-RS, and MD simulation methods.

This work employs a combination of density functional theory-infrared (IR), conductor-like screening model for real solvents (COSMO-RS), and molecular dynamic (MD) methods to investigate the impact of hydroxyl functional groups on CO2 capture within dicationic ionic liquids (DILs). The COSMO-RS reveals that hydroxyl groups in DILs reduce the macroscopic solubility of CO2 but improve the selectivity of CO2 over CO, H2, and CH4 gases. Quantum methods in the gas phase and MD simulations in the liquid phase were conducted to delve deeper into the underlying mechanisms. The IR spectrum analysis confirms red shifts in CO2's asymmetric stretching mode and blue shifts in the CR-HR bond of the dication, indicating CO2-DIL interactions and the weakening of the anion-cation interactions caused by the presence of CO2. The results show that the positioning of anions around hydroxyl groups and HR atoms in rings inhibits the proximity of CO2 molecules, causing the hydrogen atoms within methylene groups to accumulate CO2. van der Waals forces were found to dominate the interaction between ions and CO2. The addition of hydroxyl groups strengthens the electrostatic interactions and hydrogen bonds between dications and anions. The stronger interaction energy between ions in [C5(mim)2-(C2)2(OH)2][NTf2]2 limits the displacement of CO2 molecules within this DIL compared to [C5(mim)2-(C4)2][NTf2]2. Compared to [C5(mim)2-(C4)2][NTf2]2, [C5(mim)2-(C2)2(OH)2][NTf2]2 exhibits stronger ion-ion interactions, higher density, and reduced free volume, resulting in a reduction in CO2 capture. These results provide significant insights into the intermolecular interactions and vibrational properties of CO2 in DIL complexes, emphasizing their significance in developing efficient and sustainable strategies for CO2 capture.

Oil extraction desulfurization based on ionic liquid: Back-extractant screening, experiment and process simulation

A comprehensive back-extractant screening method was first developed for regenerating ionic liquids (ILs) after oil extraction desulfurization (EDS). Statistical analysis was performed using the Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) with the Entropy Weighting Method (EWM) on screening indices obtained based on the COnductor-like Screening MOdel for Realistic Solvents (COSMO-RS) and the Quantitative Structure Activity Relationship (QSAR) models. CCl4 was selected as the optimal back-extractant among 196 candidates for regenerating the IL, 1-butyl-3-methylpyridinium dicyanamide ([BMPy][DCA]), targeting the simultaneous removal of thiophene (TS), benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The experimentally measured hexary liquid–liquid equilibrium (LLE) confirmed the satisfactory selectivities and distribution coefficients of CCl4. Based on the NRTL parameters correlated from the LLE data, a complete EDS process including IL-extraction and IL-regeneration was established and evaluated economically based on the total annual cost (TAC). The results demonstrated that this process significantly decreased the sulfur content from 500 ppm to less than 10 ppm. The study results verified the feasibility and effectiveness of the proposed method and showed the excellent industrial performance of the selected IL and back-extractant.

Development of ionic-liquid-impregnated activated carbon for sorptive removal of PFAS in drinking water treatment

Adsorption of per- and poly-fluoroalkyl substances (PFAS) on activated carbon (AC) is considerably hindered by the surface water constituents, degrading the ability of the AC adsorption process to remove PFAS in drinking water treatment. Herein, we developed ionic-liquid-impregnated AC (IL/AC) as an alternative to AC for PFAS sorption and demonstrated its performance with real surface water for the first time. Ionic liquids (ILs) of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (IL(C2)) and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (IL(C6)) were selected from among 272 different ILs using the conductor-like screening model for realistic solvents (COSMO-RS) simulation. Impregnation of the ILs in AC was verified using various analytical techniques. Although the synthesized IL/ACs were less effective than pristine AC in treating PFAS in deionized water, their performances were less impacted by the surface water constituents, resulting in comparable or sometimes better performances than pristine AC for treating PFAS in surface water. The removal efficiencies of 10 wt% IL(C6)/AC for six PFAS were 1.40–1.96 times higher than those of pristine AC in a surface water sample containing 2.6 mg/L dissolved organic carbon and millimolar-level divalent cation concentration. PFAS partitioning from the surface water to ILs was not hindered by dissolved organic matter and was enhanced by the divalent cations, indicating the advantages of IL/ACs for treating significant amounts of PFAS in water. The synthesized IL/ACs were effective at treating coexisting pharmaceutical and personal-care products in surface water, showcasing their versatility for treating a broad range of water micropollutants.

Thermophysical insights and COSMO-RS study of triethylenetetramine-based protic ionic liquids with alkyl carboxylic acids

Protic ionic liquids (PILs) have increasing interest due to their potential application compared to conventional organic solvents. In the present study, new class of protic ionic liquids were developed by combining triethylenetetramine as cation and distinct carboxylic acids, specifically formic acid, butanoic acid, hexanoic acid, and octanoic acid employed as the anions. The products structures and purity were verified using 1H and 13C NMR as well as ESI-MS analysis. The structural variations effects on the thermophysical characteristics such as refractive index (nD), viscosity (η), density (ρ), and speed of sound (u) were evaluated throughout a broad temperature range. Temperatures between 293.15 and 333.15 K were used to calculate the viscosity and density values. It was also determined the thermal decomposition temperature (Td) and quantified the amount of water in the synthetic protic ionic liquids. Additional parameters such the expansion coefficient (α), standard entropy (S0), volume (V), lattice potential energy (UPOT), isentropic compressibility (βs), Intermolecular free length (Lf) of PILs were calculated using experimental values for sound speed and density. Furthermore, computation of activation energy employed the experimental viscosity values. In order to calculate the electronic polarizability and free volume present inside the ionic liquids, refractive indices of PILs were measured between the temperatures of 293.15 and 323.15 K. The study also explored the Conductor-like Screening Model for Real Solvents (COSMO-RS) computational approach to gain insights into the structural variation of TETA-based ionic liquids. The prepared PILs derived properties and linked with their structural moieties.

Inhibition of asphaltene aggregation using deep eutectic solvents: COSMO-RS calculations and experimental validation

Asphaltene precipitation/deposition adversely affects various oil and gas processes, such as oil recovery, transportation, and petroleum processing. The resulting increase in viscosity of crude oil decreases distillate yields creating unstable phase separation. Deep eutectic solvents (DESs) have recently gained interest as inhibitors of asphaltene aggregation. The goal of the present study is to derive the mechanism of inhibition of petroleum asphaltene aggregation by a novel screening of DESs. An archipelago-based chemical structure of asphaltene was adopted for performing quantum chemical calculations. The structure was used in the conductor-like screening model for real solvents (COSMO-RS) model to screen potential DESs for asphaltene precipitation. It was found that DESs containing thymol were the most promising of the 153 DES combinations screened. The COSMO-RS predictions were validated experimentally using solubility data of asphaltene in DESs. Among the studied DESs, thymol-diphenyl ether provided the highest solubility for asphaltene, which was further validated using the experimental and the COSMO-RS predicted data. In addition, to characterize the structural interactions between asphaltene and DESs, Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) measurements were performed. It was found that strong interaction between asphaltene and the DESs is responsible for the higher asphaltene dispersion. The present approach opens pathways to rationally design and understand the impact of structural variation of DESs based on their interactions with asphaltene.

Environmental impact of PFAS: Filling data gaps using theoretical quantum chemistry and QSPR modeling

Per- and polyfluorinated alkyl substances (PFAS), known for their widespread environmental presence and slow degradation, pose significant concerns. Of the approximately 10,000 known PFAS, only a few have undergone comprehensive testing, resulting in limited experimental data. In this study, we employed a combination of physics-based methods and data-driven models to address gaps in PFAS bioaccumulation potential. Using the COnductor-like Screening MOdel for Realistic Solvents (COSMO-RS) method, we predicted n-octanol/water partition coefficients (logKOW), crucial for PFAS bioaccumulation. Our developed Quantitative Structure-Property Relationship (QSPR) model exhibited high accuracy (R2 = 0.95, RMSEC = 0.75) and strong predictive ability (Q2LOO = 0.93, RMSECV = 0.83). Leveraging the extensive NORMAN, we predicted logKOW for over 4,000 compounds, identifying 244 outliers out of 4519. Further categorizing the database into eight Organisation for Economic Co-operation and Development (OECD) categories, we confirmed fluorine atoms role in enhanced bioaccumulation. Utilizing predicted logKOW, water solubility logSW, and vapor pressure logVP values, we calculated additional physicochemical properties that are responsible for the transport and dispersion of PFAS in the environment. Parameters such as Henry’s Law (kH), air–water partition coefficient (KAW), octanol–air coefficient (KOA), and soil adsorption coefficient (KOC) exhibited favorable correlations with literature data (R2 > 0.66). Our study successfully filled data gaps, contributing to the understanding of ubiquitous PFAS in the environment and estimating missing physicochemical data for these compounds.

Experimental and computational studies on isolation of cardanol from cashew nut shell liquid using diethanolamine‐based deep eutectic solvent at different molar ratios

AbstractBACKGROUNDAmine‐based deep eutectic mixtures composed of choline chloride and a DEA‐based hydrogen‐bond donor (HBD) can be used in various molar ratios such as 1:2, 1:3, 1:4, 1:5, 1:6 and 1:7 for isolation of cardanol from cashew nut shell liquid (CNSL).RESULTSIn this study, green techniques were created to extract cardanol from CNSL by utilizing a deep eutectic solvent (DES) based on diethanolamine with various molar ratios [hydrogen‐bond acceptor (HBA): HBD] of 1:2, 1:3,1:4,1:5, 1:6 and 1:7. To enhance cardanol's solubility in DES, promote phase separation, and increase cardanol yield, ethyl acetate (EA) and isobutyl methyl ketone (IBMK) could be utilized as co‐solvents. At temperatures ranging from 293 to 343.15 K and 1 atm, the density of various molar ratios of DES was determined. Additionally, the prepared DES pH behaviour as well as the relationship between pH and temperature were investigated. All investigated DES temperature increases caused a decrease in pH value. By using thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC), similar molar ratios of amine‐based DESs were studied for their thermal stability in terms of decomposition temperature, mass loss and melting temperature. The melting temperature and thermal stability were both increased when the HBD increased. The thermal stability of DES, which mostly depends on intermolecular interactions, is greatly influenced by HBD. Finally, at T = 298.15 K and 1 atm, cardanol was extracted from 50 mL CNSL using different volumes of various molar ratios of DES (100 mL, 75 mL, 50 mL and 25 mL) together with 25 mL IBMK and 25 mL EA. The extracted cardanol was evaluated using Fourier transform infrared spectroscopy and gas chromatography–mass spectrometry.CONCLUSIONIt was observed that the yields of cardanol from each prepared molar ratios ratio of 100 mL DES were 96.57%, 95.38% and 92.87%, respectively. In this study, the sigma potential and sigma profile of chosen HBA and HBD were determined using conductor‐like screening model for real solvents (COSMO‐RS), and the interactions between the molecules during the extraction process were analyzed. The findings demonstrated the viability of using the chosen DESs for the polyphenol extraction process. © 2024 Society of Chemical Industry (SCI).

Extraction of 5-Hydroxymethylfurfural and Furfural in Aqueous Biphasic Systems: A COSMO-RS Guided Approach to Greener Solvent Selection.

5-Hydroxymethylfurfural (HMF) and furfural (Fur) are promising biobased platform chemicals, derived from the dehydration of carbohydrate feedstocks, normally conducted in an aqueous phase. Plagued by side-reactions in such phase, such as the rehydration to levulinic acid (LA) and formic acid (FA) or self-condensation to humins, HMF and Fur necessitates diversification from monophasic aqueous reaction systems toward biphasic systems to mitigate undesired side-reactions. Here, a methodology based on the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) method was used to screen solvent candidates based on the predicted partition coefficients (Ki). Hansen solubility parameters in conjunction with excess thermodynamic quantities determined by COSMO-RS were employed to assess solvent compatibility. Experimental validation of the COSMO-RS values highlighted only minor deviations from the predictions with root-mean-square-error (RMSE) values of HMF and Fur at 0.76 and 5.32, respectively, at 298 K. The combined effort suggested cyclohexanone, isophorone, and methyl isobutyl ketone (MIBK) as the best candidates. Finally, extraction solvent reuse demonstrated cyclohexanone suitability for HMF extraction with KHMF of 3.66 and MIBK for Fur with KFur 7.80 with consistent partitioning across four total runs. Both solvents are classified as recommended by the CHEM21 solvent selection guide, hence adding to the sustainability of the process.

Elucidating the mechanisms of novel thiazole-based corrosion inhibitors in carbon steel/HCl interface: An integrated approach combining experimental and computational studies

Corrosion inhibitors serve as a paramount strategy in the domain of metal protection. This study investigates the efficacy of two thiazole derivatives, namely methyl (E)-5-(4-chlorophenyl)-2-((2-(1-hydroxynaphthalen-2-yl)vinyl)amino)thiazole-4-carboxylate (ThN), and methyl (E)-5-(4-chlorophenyl)-2-((2-hydroxystyryl)amino)thiazole-4-carboxylate (ThP) in mitigating corrosion of carbon steel in a 1 mol/L hydrochloric acid medium. Electrochemical Impedance Spectroscopy (EIS), Potentiodynamic Polarization (PDP), Scanning Electron Microscopy coupled with Energy-Dispersive X-ray Spectroscopy (SEM-EDX), and X-ray Diffraction analysis (XRD) were used to experimentally assess the corrosion inhibition performance of compounds under study. Experimental results revealed a concentration-dependent increase in the corrosion inhibition efficiencies of the thiazole derivatives, with ThP achieving 90 % and ThN attaining 93 %. The adsorption of both compounds adhered to the Langmuir adsorption model, indicating a physicochemical inhibition mechanism. PDP analyses revealed a mixed-type inhibitory behavior. Furthermore, SEM-EDX assessments validated the ability of the thiazole derivatives to enhance corrosion resistance. XRD studies revealed a marked decrease in corrosion-associated peaks upon the introduction of thiazole derivatives. The potential of zero charge (PZC) for the carbon steel was ascertained via EIS, clarifying the adsorption mechanism. Employing Conductor like Screening Model for Realistic Solvents (COSMO-RS), the solvation properties of the compounds were evaluated, while Quantum Chemical Calculations (QCCs) and Molecular Dynamics (MD) simulations contributed insights into reactivity descriptors and adsorption configurations on the Fe(110) surface. This study highlighted the impact of the aryl group on the adsorption and corrosion inhibition characteristics of investigated compounds, offering valuable guidance for future design and development.

Predicting sulfanilamide solubility in the binary mixtures using a reference solvent approach.

Solubility is a fundamental physicochemical property of active pharmaceutical ingredients. The optimization of a dissolution medium aims not only to increase solubility and other aspects are to be included such as environmental impact, toxicity degree, availability, and costs. Obtaining comprehensive solubility characteristics of chemical compounds is a non-trivial and demanding process. Therefore, support from theoretical approaches is of practical importance. This study aims to examine the accuracy of the reference solubility approach in the case of sulfanilamide dissolution in a variety of binary solvents. This pharmaceutically active substance has been extensively studied, and a substantial amount of solubility data is available. Unfortunately, using this set of data directly for theoretical modeling is impeded by noticeable inconsistencies in the published solubility data. Hence, this aspect is addressed by data curation using theoretical and experimental confirmations. In the experimental part of our study, the popular shake-flask method combined with ultraviolet (UV) spectrophotometric measurements was applied for solubility determination. The computational phase utilized the conductor-like screening model for real solvents (COSMO-RS) approach. The analysis of the results of solubility calculations for sulfonamide in binary solvents revealed abnormally high error values for acetone-ethyl acetate mixtures, which were further confirmed with experimental measurements. Additional confirmation was obtained by extending the solubility measurements to a series of homologous acetate esters. Our study addresses the crucial issue of coherence of solubility data used for many theoretical inquiries, including parameter fitting of semi-empirical models, in-depth thermodynamic interpretations and application of machine learning protocols. The effectiveness of the proposed methodology for dataset curation was demonstrated for sulfanilamide solubility in binary mixtures. This approach enabled not only the formulation of a consistent dataset of sulfanilamide solubility binary solvent mixtures, but also its implementation as a qualitative tool guiding rationale solvent selection for experimental solubility screening.

Computational study on organochlorine insecticides extraction using ionic liquids

Insecticides pose hazardous environmental effects and can enter the food chain and contaminate water resources. Ionic liquids (ILs) have recently drawn much interest as environmentally friendly solvents and have been an efficient choice for extracting pesticides because of their outstanding thermophysical characteristics and tunable nature. In this study, ILs were screened using COSMO-RS (Conductor-like Screening Model for Real Solvents) to extract organochlorine insecticides from water at 289 K. A total of 165 ILs, a combination of 33 cations with five anions, were screened by COSMO-RS to predict the selectivity and capacity of the organochlorine insecticides at infinite dilution. The Organochlorine insecticide compounds, such as benzene hexachloride (BHC), Heptachlor, Aldrin, Gamma-Chlordane (γ-Chlordane), Endrin, and Methoxychlor are selected for this study. Charge density profiles show that Endrin and Methoxychlor compounds are strong H-bond acceptors and weak H-bond donors, while the rest of the compounds are H-bond donors with no H-bond acceptor potential. Moreover, it has been shown that ILs composed of halides and heteroatomic anions in conjunction with cations have enhanced selectivity and capacity for insecticides. Moreover, the hydrophobic phosphonium-based ILs have enhanced selectivity and capacity for insecticides. In BHC extraction, the selectivity of 1,3-dimethyl-imidazolium chloride was found to be the highest at 1074.06, whereas 2-hydroxyethyl trimethyl ammonium chloride exhibited the highest capacity being 84.0.1,3-dimethyl-imidazolium chloride exhibits the highest performance index, which is 57064.77. In addition, the ILs that have been chosen are well-recognized as environmentally friendly and very effective solvents to extract insecticides from water. As a result, this study evaluated that ILs could be promising solvents that may be further developed for the extraction of insecticides from contaminated water.

Effective removal of personal care product residues from aqueous media using hydrophobic deep eutectic solvents: Experimental and computational approach

Personal care product (PCP) residues - classified under micropollutants (MPs)- are widely found in aquatic environments, posing trace-level toxicity. Traditional water treatment techniques struggle to remove these toxins effectively. Deep eutectic solvents (DESs), the liquid mixtures typically composed of hydrogen bond donors (HBDs) and hydrogen bond acceptors (HBAs), have recently emerged as a viable alternative for extracting pollutants from water. Among DESs, hydrophobic deep eutectic solvents (HDESs) exhibit low water miscibility and unique solvent properties. The main objective of this study is to synthesize HDESs to effectively eliminate 2-naphthol and methylparaben- two of the significant chemical contaminants in PCPs- from aqueous media. HDESs were prepared by mixing different terpenes (menthol and thymol) and long-chain carboxylic acids at varying molar ratios. They were characterized using different spectroscopic and thermal techniques. The density and viscosity of the pure DESs were measured as afunction of temperature. Experimental studies were carried out using the liquid–liquid extraction (LLE) method, and the factors influencing the efficiency of extraction were optimized.Considering the limited number of studies on the extraction mechanism of MPs from aqueous media, this study employs comprehensive computational methods, including density functional theory (DFT) and the COnductor-like Screening MOdel for Real Solvents (COSMO-RS), to provide a detailed interpretation of the extraction mechanism. A series of successive extractions were conducted to reduce the DES usage to ensure economic viability. The reusability of the best-performed DES was explored. Additionally, the regeneration of one of the DESs was accomplished through activated carbon-based recovery.---------------------------------------------------------------------------------------------------------------------

Evaluation of amine-based ionic liquids as potential solvents for hydrogen sulfide absorption using COSMO-RS: Computational and experimental validation

Ionic liquids (ILs) is an effective way to convert and remove hydrogen sulfide, H2S from natural gas streams. Amine-based ILs have recently been discovered due to their efficiency of removing H2S due to their excellent characteristics. However, the selection of potential amine-based ILs from a wide range combination of cations and amine-based anions are rather challenging if performed experimentally. Conductor-like Screening Model for Real Solvents (COSMO-RS) was used for the prediction of liquids thermodynamics such as activity coefficient at infinite dilution, selectivity, capacity and performance index (PI) values to evaluate the performance of each amine-based ILs and determine the most efficient ILs for H2S absorption without requiring any experimental data. A total of 42 previously unexplored ionic liquids, amine-based ILs from a combination of 7 amine cations and 6 anions were screened by COSMO-RS model. The findings from COSMO-RS prediction results revealed that ILs without aromatic rings displayed higher efficiencies compared to ILs with aromatic rings. Moreover, N,N,N′,N′-tetramethyl-1,3-propanediamine chloride, [TMPDA][Cl] cation-anion combinations displayed the highest PI value of 52.55 among the screened ILs thus, predicted as the most efficient ILs for H2S absorption. The experimental results obtained validated the COSMO-RS predictions with an approximation of ± 4.51% discrepancies between predicted and experimental data. Hence, it is concluded that COSMO-RS can be used for a reliable pre-experimental prediction and amine-based ILs approach has a huge potential for effective H2S absorption in industrial applications.

Sustainable In Silico-Supported Ultrasonic-Assisted Extraction of Oligomeric Stilbenoids from Grapevine Roots Using Natural Deep Eutectic Solvents (NADES) and Stability Study of Potential Ready-to-Use Extracts.

Grapevine roots, as a side-stream of a vineyard, are a sustainable resource for the recovery of oligomeric stilbenoids, such as the bioactive r-viniferin. The aim of this study is to evaluate an in silico-supported method, based on the Conductor-like Screening Model for Real Solvents (COSMO-RS), for selection of environmentally friendly natural deep eutectic solvents (NADES) with regard to the extraction of grapevine roots. The most suitable NADES system for ultrasonic-assisted extraction of r-viniferin was choline chloride/1,2-propanediol. The optimal extraction parameters for r-viniferin were determined using single-factor experiments as follows: choline chloride/1,2-propanediol 1/2 mol/mol, 10 wt% H2O, biomass/NADES ratio 1/10 g/g, and 10 min extraction time. Under optimized conditions, the extraction yield of r-viniferin from grapevine roots reached 76% of the total r-viniferin content. Regarding stability, stilbenoids in choline chloride/1,2-propanediol remained stable during 128 days of storage at ambient temperature. However, fructose/lactic acid-based NADES were observed to degrade stilbenoids; therefore, the removal of the NADES will be of interest, with a suitable method implemented using Amberlite® XAD-16N resin. As green solvents, the NADES have been used as effective and environmentally friendly extractants of stilbenoid-containing extracts from grapevine roots for potential applications in the cosmetic and pharmaceutical industry or as nutraceuticals in the food industry.

Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights.

This study investigates the efficacy of adsorbents from locally sourced olive waste-encompassing olive skins, leaves, and pits, recovered from the initial centrifugation of olives (OWP)-and a composite with sodium alginate (OWPSA) for the removal of Cu2+ ions from synthetic wastewater. Experimental analyses conducted at room temperature, with an initial Cu2+ concentration of 50 mg/L and a solid/liquid ratio of 1 g/L, showed that the removal efficiencies were approximately 79.54% and 94.54% for OWP and OWPSA, respectively, highlighting the positive impact of alginate on adsorption capacity. Utilizing statistical physics isotherm models, particularly the single-layer model coupled to real gas (SLMRG), allowed us to robustly fit the experimental data, providing insights into the adsorption mechanisms. Thermodynamic parameters affirmed the spontaneity and endothermic nature of the processes. Adsorption kinetics were interpreted effectively using the pseudo-second-order (PSO) model. Molecular modeling investigations, including the conductor-like screening model for real solvents (COSMO-RS), density functional theory (DFT), and atom-in-molecule (AIM) analysis, unveiled intricate molecular interactions among the adsorbent components-cellulose, hemicellulose, lignin, and alginate-and the pollutant Cu2+, confirming their physically interactive nature. These findings emphasize the synergistic application of experimental and theoretical approaches, providing a comprehensive understanding of copper adsorption dynamics at the molecular level. This methodology holds promise for unraveling intricate processes across various adsorbent materials in wastewater treatment applications.

Natural deep eutectic solvents for turbidity removal from synthetic pharmaceutical wastewater

Contamination of water resources by active pharmaceutical ingredient wastes is among major environmental concerns. To prevent major disruptions of aquatic life, an efficient and environmentally-friendly turbidity removal procedure of common contaminants such as paracetamol should be established. In this study, several natural deep eutectic solvents (NADESs) were screened to reduce the turbidity of simulated water contaminated with paracetamol below the standard turbidity limit recommended by the National Water Quality Standards for Malaysia (50 NTU). The optimal operating parameters (NADES dosage, stirring time and operating pH) were determined. Under optimized conditions, stearic acid-based NADES achieved the highest turbidity removal of 97.5 %. High coagulation performances were investigated based on molecular interaction using COSMO-RS (COnductor like Screening MOdel for Real Solvents) ?-profile and ?-potential (histogram of charge density distribution over molecular surface) and showed high affinity between the NADES compounds and paracetamol. Thus, NADESs are promising candidates for turbidity removal of paracetamol from water and are viable in further investigations for effluent treatment applications.

Highly Concentrated Electrolytes for Lithium Sulfur Batteries – the Role of the Anion(s)

Lithium-sulfur batteries (Li-S) have attracted a lot of attention as a alternative/complement to lithium-ion batteries (LIBs) – due to both high energy density, availability, and inexpensive materials used.[1]Yet, dissolution of sulfur from the C/S cathode and subsequent shuttling of lithium polysulfides (LiPS) to the anode as well as the instability of the Li metal anode itself are true scientific and technological challenges. Advancing in the field of electrolytes is one promising way to overcome both issues.Switching from the standard 1 M electrolyte design of LIBs to highly concentrated electrolytes (HCEs) may both prevent the dissolution of LiPSs and hinder dendrite formation at the lithium metal anode.[2]Here we combine experimental methods and computational approaches to investigate several HCEs based on various Li-salts in several standard organic solvents. Experimentally we targeted electrochemical properties, local electrolyte structure, and physico-chemical properties, with focus on the role(s) of the Li-salt anions. Furthermore, to predict the solubility of sulfur the conductor like screening model for real solvents (COSMO-RS), a computational fluid phase thermodynamic approach, was used.[3] Overall, the challenges and opportunities associated with the use of HCEs in Li-S batteries will be addressed, also highlighting potential areas for future research and development.References Peng et al., "Drastic effect of salt concentration in ionic liquid on performance of lithium sulfur battery." Journal of the Electrochemical Society 169.5 (2022): 050515.Suo et al., "A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries." Nature communications 4.1 (2013): 1481.Jeschke and P. Johansson, "Predicting the Solubility of Sulfur: A COSMO‐RS‐Based Approach to Investigate Electrolytes for Li–S Batteries." Chemistry–A European Journal 23.38 (2017): 9130-9136.

Extraction of Pyrrole from Its Mixture with n-Hexadecane Using Ionic Liquids and Their Binary Mixtures.

The conventional hydrodenitrogenation method is expensive and involves the use of catalysts and harsh procedures. In the last few years, ionic liquids (ILs) have gained attention as a promising alternative solvent for fuel oil extractive denitrogenation. In this work, the Conductor-like Screening Model for Real Solvents (COSMO-RS) was used to screen 173 potential ILs as solvents for fuel oil. Two ILs (1-ethyl-3-methylimidazolium dicyanamide ([EMIM][N(CN)2]) and 1-ethyl-3-methylimidazolium methanesulfonate ([EMIM][MeSO3])) were selected for experimental investigation. The experimental liquid-liquid extraction of pyrrole (taken as the model nitrogen compound) from n-hexadecane (the model fuel) was conducted at 298 K and 1 atm with feed concentrations of pyrrole ranging from 10 to 50 wt%, using either the two pure ILs or their mixtures with dimethylformamide or ethylene glycol. Moreover, the NRTL model was effectively used to correlate the experimental tie lines. This work shows that the use of a binary mixture of ILs with a conventional solvent results in good selectivity, but has a low capacity for extracting pyrrole compounds. On the other hand, using an IL-IL mixture exhibits good results for both capacity and selectivity. All the ternary systems tested showed positive slopes, indicating that the nitrogen compounds had a higher affinity for the IL and binary mixture extract phase. In fact, the extraction efficiency for all the systems shows promising results. This characteristic is advantageous, as it requires less solvent to remove nitrogen compounds.

Predicting PC‐SAFT parameters based on COSMO‐RS

AbstractTo predict the size (m, σ) and energy (ε) parameters of the perturbed‐chain statistical associating fluid theory (PC‐SAFT) based on the conductor‐like screening model for realistic solvents (COSMO‐RS), in this work, the PC‐SAFT model parameters of 304 substances were reviewed and summarized, their COSMO‐RS results linked to the size and energy were predicted, and the relationships between the PC‐SAFT parameters and COSMO‐RS results were obtained in 3 cases (Case 1: relationships based on n‐alkanes, Case 2: category‐specific relationships, Case 3: generic relationships for 138 substances). Case 2 (including Case 1) shows the lowest average absolute relative deviations (AARDs) of 7.63% (m), 3.05% (σ), and 9.05% (ε), while Case 3 provides the prediction capacity with AARDs of 10.00% (m), 4.05% (σ), and 13.21% (ε), which is better than those developed by others. Finally, the new PC‐SAFT parameters were used to predict the densities and vapor pressures of 8 representative substances and compared with the results using the original PC‐SAFT parameters, showing that the parameters in Case 3 can be used to reproduce densities and the parameters in Case 2 (including Case 1) can be used to reproduce both densities and vapor pressures.